![]() ![]() ![]() We do not cover this scenario in this guide. There are circumstances where using different versions for the host UHD and FPGA image is necessary performing this scenario is very similar to the steps in this guide, but requires some additional steps once the USRP is accessible via networking. During runtime, UHD checks its version against that of all target USRPs' FPGA versions, and if they are too different then UHD prints an note about the mismatch and errors out. We recommend using an X310 FPGA image provided by the host computer's UHD install, so that their versions match up. If you do not have UHD installed, please install it, for example via the Building and Installing the USRP Open-Source Toolchain (UHD and GNU Radio) on Linux Application Note. This guide assumes you have a Linux-based host computer that supports Xilinx Vivado, with UHD installed into the default prefix /usr/local for example we are using Ubuntu Linux and installed UHD from source using the default CMAKE_INSTALL_PREFIX. USB2 cable - One of the following, depending on the host computer's NIC Connections from host to the X3x0 USRP via.USB2/3 port - 1 GbE or 10 GbE network interface (NIC) - Supports Xilinx Vivado Lab installation - Supports UHD installation In theory it can be made to work on any OS that supports Xilinx Vivado.įor reference, please refer to the user manual page for the X300/X310. ![]() Note: This guide is written for Linux only. This application note covers the process of recovering the USRP X300/X310 by flashing the FPGA image via the JTAG interface. AN-305 by Nate Temple and Michael Dickens ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |